Chapter 5 Shortcut Operations And Specification - Genie GSD106 User Manual

Chapter 5 Shortcut Operation Table
1 System Preset Operation Table
Preset 80 (Call 80)
Preset 81 (Call 81)
Preset 82 (Call 82)
Preset 83 (Call 83)
Preset 84 (Call 84)
Preset 85 (Call 85)
Preset 86 (Call 86)
Preset 87 (Call 87)
Preset 88 (Call 88)
Preset 89 (Call 89)
Preset 90/95 (Call 90/95)
Preset 91 (Call 91)
Preset 92 (Call 92)
Preset 93 (Call 93)
Preset 94 (Call 94)
Preset point setting:
Call Preset point:
Clear Preset point:
System Preset Operation Table
Run PTZ Tour 1
Run PTZ Tour 2
Run PTZ Tour 3
Start VectorScan 1
Start VectorScan 2
Start VectorScan 3
Start VectorScan 4
Start VectorScan 5
Start VectorScan 6
Joystick Freeze and Unfreeze Video
Setup the Menus and Camera
Invokes the Flashback Function
Administrator Logon
Operator Logon
Restart Dome Power Supply (Set Preset 94 as the power
supply for shutting down the dome)
Method 1: First input "PRESET", and then input the number of the
preset point. Press "ENTER" to complete (PRESET + No. + ENTER).
Method 2: First input the number of preset point. Then press "SHOT".
Press "ON" to complete (Preset No. + Shot + ON).
Method 1: First input "CALL". Then Input the number of the preset point.
Press "ENTER" to complete (Call + Preset No. + ENTER).
Method 2: First input the number of preset point. Then press "SHOT ".
Press "ACK" to complete (Preset No. + Shot + ACK).
Method 1: First input "PRESET". Then input the number of preset point.
Press "OFF" in the end (PRESET + Preset No. +OFF)
Method 2: First input the preset No. Then press "SHOT".
Press "OFF" to complete ( Preset No. + SHOT + OFF).
34