Date/Time - Genie GSD106 User Manual

② Call Preset
③ Camera Setup
④ Program PTZ Tour
⑤ Run PTZ Tour
⑥ Program VectorScan OFF
⑦ Run VectorScan
⑧ Program Date/Time
⑨ Program Alarm
⑩ Operate Dome Menu ON
8.4 Password Logon
<<Password Logon ON/OFF

9. Date/Time

<<Date/Time Setup
Note This is used for management of the system date&time. You can program the assignment of the operating
time of the dome via this option.
9.1 Date/Time Setup
<< Date/Time Setup
Note This option is used by users to modify date and time, as well as to set the date and time displayed.
① Clock Display ON
② Date Display
③ Display Mode Y/M/D
④ Date/Time Modify
Refer to Numeric Input Steps Instructions to set date/time.
1 Year
2 Month
3 Date
4 Day
5 Hour
6 Minute
7 Second
IRIS CLOSE to exit
ON << Call Preset
OFF << Camera Setup
OFF << Program PTZ Tour
ON << Run PTZ Tour
<< Program VectorScan
ON << Run VectorScan
OFF << Program Date/Time
OFF << Program Alarm
<< Operate Dome Menu
<< Clock Display ON/OFF
ON << Date Display
<< Display Mode Y/M/D D/M/Y
<< Date/Time Modify
Date/Time Modify
11
3
5
Sat
17
53
43
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
Joystick Left/Right to select
Press IRIS OPEN or Joystick Left/Right to enter
Press IRIS OPEN or Joystick Left/Right to enter
Joystick Left/Right to select
ON/OFF Joystick Left/Right to select
Joystick Left/Right to select
Press IRIS OPEN or Joystick Left/Right to enter
Note
Year 2000 2099 (00 99)
Month 1 12
Date 1 (28/29/30/31)
Day Mon/Tue/Wed/Thurs/Fri/Sat/Sun
Hour 0 23
Minute 0 59
Second 0 59
Press IRIS CLOSE to EXIT
31
Joystick Left/Right to select
Joystick Left/Right to select
Joystick Left/Right to select
Joystick Left/right to select
Joystick Left/Right to select
Joystick Left/Right to select
Joystick Left/Right to select
Joystick Left/Right to select
Joystick Left/Right to select
Press IRIS CLOSE to EXIT