User Admin - Genie GSD106 User Manual

8. User Management
Note: This authority only belongs to the Administrator.
8.1 Master Setup
<<Master Setup
① <<Edit Password
Refer to Numeric Input Steps Instructions to set a new password. If the setup is correct, the screen
displays the message Done!. Otherwise, the message Error! is displayed.
② << Operation Lock
③ << Wait
Refer to Numeric Input Steps Instructions to set up time.
Note a) If the operation Lock function is enabled and no control command is received within the
specified waiting time, the dome will lock up the operation until a successful re-login.
b) Operational Lock of all-level users is only effective to its own level.
8.2 Operator Setup
<<Operator Setup
Refer to Master Setup section for details.
8.3 Authorisation
<<Authorisation
Note This option is for the configuring of general users' operating authorities by the administrator. If any
functions are set as ON, it indicates the function is open to general users. Otherwise the screen shows
"No Authorisation"
① Program Preset
PLS enter the new PSW
* * * * * *
IRIS CLOSE when done
ON/OFF
OFF << Program Preset
Press IRIS OPEN or Joystick Left/Right to enter
Press IRIS OPEN or Joystick Left/Right to enter
Press IRIS OPEN or Joystick Left/Right to enter
Confirm the new PSW
————
IRIS CLOSE when done
Joystick Left/Right to select
Press IRIS OPEN or Joystick Left/Right to enter
Press IRIS CLOSE to EXIT
Press IRIS OPEN or Joystick Left/Right to enter
Press IRIS OPEN or Joystick Left/Right to enter
ON/OFF
30
Joystick Left/Right to select