Function Programming - Genie GSD106 User Manual

7.Function Programming

<<Special Function Programming
7.1.PTZ Tour (Pattern)
<<Pan/Tilt/Zoom Tour programming
① Number
<<PTZ Tour number
② Name
_ _ _ _ _ _ _ _
<<Edit PTZ name
_ _ _ _ _ _ _ _
↑
IRIS CLOSE when done
0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J
K L M N
↑
O P Q R S T U V W X Y Z _
IRIS OPEN when done
IRIS CLOSE to exit
③ Program a Tour
<<Enter PTZ Tour programming
IRIS OPEN to begin
IRIS CLOSE when done
④ Run a Tour
<<Run Pan/Tilt/Zoom Tour (Pattern)
Joystick Left/Right to select an already programmed tour; from the options. Joystick Up/Down to select the
Run a Tour menu. Press IRIS OPEN or Joystick Left/Right to run the selected tour. Move the Joystick in any
direction to cancel the tour and return to the previous menu.
(1 ~3)
Press IRIS OPEN or Joystick Left/Right to enter
Press IRIS OPEN or Joystick Left/Right to enter
Joystick Left/Right to select
Press IRIS OPEN or Joystick Left/Right to enter
Press IRIS OPEN to enter
<<Move Joystick Left/Right, when programming,
to select Preset and press IRIS OPEN to confirm.
Joystick Left/Right to select (0~~9 or A~~Z). Press
IRIS OPEN to confirm. Press IRIS CLOSE to exit
to upper level menu when programming is
complete.
Press IRIS OPEN or Joystick Left/Right to enter
<<Press IRIS OPEN to confirm and start programming.
<<Press IRIS CLOSE to exit programming and return to upper
level menu.
Press IRIS OPEN or Joystick Left/Right to enter
24