Using The Led Status Panel - RuggedCom RuggedRouter RX1000 User Manual

The Webmin Menu provides the ability to:
Configure the sign-on password,
•
Specify session timeouts,
•
Restrict the Subnet of IP addresses that can login,
•
Configure and view Webmin event logs,
•
The System Menu provides the ability to:
Change the router password,
•
Enable and disable applications from running,
•
Reboot the router,
•
Schedule one time and periodic tasks to run,
•
Change the router's name (hostname),
•
Change the time and date.
•
The Servers Menu provides the ability to:
Control and configure the Serial Protocol, DHCP, NTP, IRIGB and SSH servers.
•
The Networking Menu provides the ability to:
Configure the network interfaces,
•
Configure static IP and Multicast Routings and configure a default
•
gateway,
Select a DNS server and edit local host addresses,
•
Configure End To End Backup,
•
Configure DDS, T1/E1, T3 and ADSL Networking,
•
Configure the embedded modem,
•
Set up the firewall,
•
Set up Virtual Private Networking,
•
Configure Routing protocols such as OSPF and RIP,
•
Configure Virtual Router Redundancy Protocol (VRRP),
•
Configure Traffic Prioritization,
•
Perform pings, traceroutes, host lookups and line tracing.
•
The Maintenance Menu provides the ability to:
Manage the Gauntlet Security Appliance
•
Backup and restore configurations,
•
Configure SNMP access,
•
Configure RADIUS Authentication,
•
View system logs,
•
Upgrade the software of the router,
•
Upgrade the router type to RX1100,
•
Upload/Download files to and from the router.
•

Using The LED Status Panel

The LED status Panel provides the console port, indicates the status of
hardware/software and can initiate a controlled reboot.
RuggedCom
Chapter 1 - Setting Up And Administering The Router
33