Dynamic Routing Configuration; Enable Protocols; Figure 131: Dynamic Routing Menu; Figure 132: Enable Protocols Menu - RuggedCom RuggedRouter RX1000 User Manual

Dynamic Routing Configuration

Figure 131: Dynamic Routing Menu

Before dynamic routing protocols can be used, quagga must be enabled in the Bootup
and Shutdown menu.
After quagga is enabled, RIP or OSPF itself must be enabled in the Enable Protocols
menu of Dynamic Routing.
The Core menu configures link related items such as link-detect and link cost.
The RIP and OSPF menu configure these protocols for each interface.

Enable Protocols

Figure 132: Enable Protocols Menu

This menu enables RIP and OSPF for dynamic routing.
RuggedCom
Chapter 16 - Configuring Dynamic Routing
159