Using The Led Status Panel; Figure 13: Led Status Panel - RuggedCom RuggedRouter RX1000 User Manual

RuggedRouter User Guide
Configure the sign-on password,
Specify session timeouts,
Restrict the Subnet of IP addresses that can login,
Configure and view Webmin event logs,
The System Menu provides the ability to:
Change the router password,
Enable and disable applications from running,
Reboot the router,
Schedule one time and periodic tasks to run,
Change the router's name (hostname),
Change the time and date.
The Servers Menu provides the ability to:
Control and configure the Serial Protocol, DHCP, NTP, IRIGB and SSH
servers.
The Networking Menu provides the ability to:
Configure the network interfaces,
Configure static IP and Multicast Routings and configure a default
gateway,
Select a DNS server and edit local host addresses,
Configure End To End Backup,
Configure DDS, T1/E1, T3 and ADSL Networking,
Configure the embedded modem,
Set up the firewall,
Set up Virtual Private Networking,
Configure Routing protocols such as OSPF and RIP,
Configure Virtual Router Redundancy Protocol (VRRP),
Configure Traffic Prioritization,
Perform pings, traceroutes, host lookups and line tracing.
The Maintenance Menu provides the ability to:
Manage the Gauntlet Security Appliance
Backup and restore configurations,
Configure SNMP access,
Configure Radius Authentication,
View system logs,
Upgrade the software of the router,
Upgrade the router type to RX1100,
Upload/Download files to and from the router.

Using The LED Status Panel

Figure 13: LED Status Panel

36 RuggedCom