Ospf Network Areas; Ospf Status; View Ospf Configuration; Figure 139: Network Areas - RuggedCom RuggedRouter RX1000 User Manual

OSPF Network Areas

Figure 139: Network Areas

OSPF uses areas to control which routes are distributed between routers. To add a
network to an area, enter the area id and the network address and netmask and click
Add. To delete an entry click the Delete button beside the entry. All networks routes
that are part of the same area will be distributed to other routers in the same area.

OSPF Status

This status menu shows various pieces of information about the current OSPF status.
The status of each interface is shown, the current database, the current OSPF
neighbors and the current OSPF routing table.

View OSPF Configuration

This menu shows the current configuration file of OSPF.
RuggedCom
Chapter 16 - Configuring Dynamic Routing
165