Obtaining Chassis Information; Figure 13: Led Status Panel; Figure 14: Meaning Of Leds - RuggedCom RuggedRouter RX1000 User Manual

®
RuggedRouter User Guide
The LEDs are organized into three primary groups; the port group, GPS/PPP group
and the Alarm/Power Supply group. The display possibilities are as follows:
LED Name
LED 1-4
LED 5-8
LED 9-12
LED 13-16
LED 17-20
LED 21-24
PPP-DATA
PPP-LINK
GPS-LOCK
ALARM
POWER 1
POWER 2

Figure 14: Meaning of LEDs

The software will cause the ALARM LED to become active for various reasons. Any
condition that causes the ALARM LED to become active will activate the critical fail
relay. The Web interface displays the alarms.
Pressing the pushbutton for more than five seconds will reboot the router.

Obtaining Chassis Information

The chassis displays the hardware inventory at boot time. This information is
captured in the /var/log/messages file after boot. The Web Management interface
home page displays the chassis serial number.
34

Figure 13: LED Status Panel

Description
Ethernet port 1-4 is active when green
Ethernet port 1-4 has link when green and failed when red
WAN port 1-4 is active when green
WAN port 1-4 has link when green and failed when red
WAN port 5-8 is active when green
WAN port 5-8 has link when green and failed when red
PPP Modem port is active when green
PPP Modem port has link when green
The PTP card GPS system has satellite lock
A Major Alarm exists when red
Power supply 1 working properly when green and failed when red
Power supply 2 working properly when green and failed when red
RuggedCom