Upgrading Software - RuggedCom RuggedRouter RX1000 User Manual

Chapter 8 - Configuring Frame Relay/PPP And T3

Upgrading Software

For some customers, access to remote sites in accomplished solely by a T3
connection. Usually a software upgrade will stop the system being upgraded, perform
the upgrade and then restart it. If T3 port was upgraded in this way, the upgrade
would fail as the T3 link was taken down. Instead, T3 software upgrades modify only
the software on the disk. You must schedule a reboot in order to run the new version
of T3 software.
RuggedCom 81