Display Panel Description; Figure 12: Rsg2300 Led Display Panel; Table 3: Led Display - Device Status Led Behavior Definition - RuggedCom RuggedSwitch RSG2300 Installation Manual

1.5 Display Panel Description

RSG2000 series products are equipped with a versatile display panel, shown in
Figure 12, which provides real-time status information for each port and for the
chassis as a whole, to allow simple diagnostics and troubleshooting. It features:

RS232 console port for 'out of band' console access and configuration

Power supply and Alarm status indicators

Convenient port status indicators conveying Link/Activity, Duplex, or Speed
via the Mode push-button (toggles between the three display modes)

System reset via the Mode push-button (if held for 5 seconds)

Figure 12: RSG2300 LED Display Panel

The device status LEDs provide a quick visual indication of the operational status
of the unit. Table 3 lists the possible LED colors and their corresponding
descriptions.
LED
PS1 / PS2
Alarm
Table 3: LED Display – Device status LED behavior definition
RuggedCom®
Color
Green Power supply operating normally
Red Power supply failure
Off No power supply installed
Red An alarm condition exists – log in to the web
management interface or to the CLI to
determine the alarm code
Off No alarms exist
14
RuggedSwitch RSG2300 Installation Guide Rev108
Product Overview
Description