Calibration (As Needed Only); Factory Default; About - Pandigital S8X1103 User Manual

To set the Date & Time:
1.
2.
3.
4.
5.
6.
7.
Calibration ( as n eeded o nly)
If the scanned image has vertical lines or discolorations, the scanner may need calibrating in
order for the Contact Image Sensor (CIS) to resume its color and sharpness precision.
Do not calibrate the scanner unless it is necessary to correct scanned image problems.

Calibration will also format the internal storage disk (ONLY when a microSD card is not inserted).

For calibration instructions, see the "Calibrate the Scanner" section on page 41.
Factory D efault
At any time you can reset all menu settings back to the factory defaults.To reset defaults:
1.
2.
3.
4.
5.
6.
About
The About option lists the system version, calibration status, and device serial number.
 You may need this information if you contact our Customer Support.
1. With the "Scan Ready"
2. Press
3. Press
26
With the "Scan Ready"
Press to select
Press to scroll to
Press to navigate to each setting option.
Press to set the value.
Press to accept values and to complete.
Press to exit.
With the "Scan Ready"
Press to select
Press to scroll to
Press to select
To confirm, press
After a successful reset, the scanner automatically shuts off. Press
scanner back on.
Settings
to select

About

to scroll to
screen displayed, press
Settings
.
Date & T ime
, and then press
screen displayed, press
Settings
.
Factory D efault
, and then press
Yes
.
.
screen displayed, press
.
, and then press
to enter Menu mode.
to select it.
to enter Menu mode.
to select it.
to enter Menu mode.
to select it.
to turn the