Calibration (As Needed Only); Factory Default; About; Use Of Protective Sleeves (Optional) - Pandigital PANSCN09 User Manual

Calibration (as needed only)

If the scanned image has vertical lines or discolorations, the scanner may need calibrating in
order for the Contact Image Sensor (CIS) to resume its color & sharpness precision.
 Do not calibrate the scanner unless it is necessary to correct scanned image problems.
For calibration instructions, see the "Calibrate the Scanner" section on page 30.

Factory Default

At any time you can reset all menu settings back to the factory defaults.
To reset defaults:
1.
2.
3.
4.
5.
6.

About

The About option lists the current Firmware and Calibration versions.
 You may need this information if you contact our Customer Support.
1. With the
2. Press
3. Press
U s e o f P ro t e c t i ve Sl e eve s (o pt io n al)
 5"x7" protective sleeves (not included with the scanner) can be purchased on our website:
www.pandigital.net.
We recommend using a 5"x7" protective sleeve for your older, fragile photos and when scanning
originals smaller than 2"x2" using the feeder dock.
With the screen displayed, press
Press to select
Press to scroll to
Press to select
To confirm, press
After a successful reset, the scanner automatically shuts off. Press
scanner back on.
screen displayed, press
Settings
to select
About
to scroll to
Settings
.
Factory Default
, and then press
Yes
.
.
.
, and then press
to enter Menu mode.
to select it.
to enter Menu mode.
to select it.
to turn the
21