Table of Contents
Advertisement
1.
2.
3.
4.
5.
Power
S aving
To conserve power, the scanner automatically shuts off when left idle for a specified time
(90 seconds, 3 minutes [default], or 5 minutes).
To change the power saving time setting:
1.
2.
3.
4.
5.
Orientation
( best
u sed
f or
P DF
s cans)
The default scan orientation is Landscape, scanning down from top-to-bottom of an original.
This orientation works best for the majority of your scanning (JPG or PDF).
You can also hold the scanner vertically and scan a
document from right-to-left (i.e., scanning book pages).
However, if you leave the orientation set as Landscape,
the saved image will be rotated 90
In Portrait mode, the images are automatically rotated 90
ensuring the vertically scanned image is saved in the correct viewing orientation, thus
eliminating the need to manually rotate the saved images later.
Changing the orientation to Portrait mode is best used for PDF vertical right-to-left scans.
If you do need to manually rotate saved images, you can use the included Presto! PageManager
software or your own graphic software.
Scanning the same original in different orientations may produce scanned images that look slightly
different in color tones and brightness. This is not a malfunction.
22
With the "Scan Ready"
Press
to select
Press
to scroll to
Press
to focus on the desired setting, and then press
Press
to exit.
With the "Scan Ready"
Press
to select
Press
to scroll to
Press
to focus on the desired setting, and then press
Press
to exit.
screen displayed, press
Settings
.
LCD
o ff
, and then press
screen displayed, press
Settings
.
Power
S aving
, and then press
or
o
left.
to enter Menu mode.
to select it.
to select it.
to enter Menu mode.
to select it.
to select it.
o
right before being saved,
Hide quick links:
Advertisement
Table of Contents
