Power On The Scanner; Set Scan Resolution; Scan An Original - Pandigital PhotoLink PANSCN04 User Manual

Power on the Scanner

2. Wait until the power indicator stops blinking and stays on steady
indicating the scanner is ready.
Note

Set Scan Resolution

Note

Scan an Original

1. If necessary, insert your photo into the plastic sheath (see
page 10).
14
1. Press and hold the
The power indicator light blinks (orange for
600dpi, green for 300dpi). (For more information
on the indicator lights, refer to "Scanner Indicator
Lights" on page 9.)
Do not insert an original into the feeding slot when the power
:
indicator is blinking; the original will not be scanned.
The default resolution is 600dpi.
To change to 300dpi, press the
button before scanning.
The power indicator light will light orange for 600dpi or
:
green for 300dpi.
Power
button for 2 seconds.
RESOLUTION