Table of Contents
Advertisement
4. Press
5. Press
Power Saving
To conserve power, the scanner automatically shuts off when left idle for a specified time (90
seconds, 3 minutes [default], or 5 minutes).
To change the time setting:
1. With the
2. Press
3. Press
4. Press
5. Press
Orientation (best used for PDF scans)
The default scan orientation is Landscape, scanning down top-to-bottom of an original. This
orientation works best for the majority of your scanning (JPG or PDF).
You can also hold the scanner vertically and scan a
document from right-to-left (i.e., scanning book pages).
However, if you leave the orientation set as Landscape,
the saved image will be rotated 90
In Portrait mode, the images are automatically rotated 90
ensuring the vertically scanned image is saved in the correct viewing orientation, thus
eliminating the need to manually rotate the saved images later.
Changing the orientation to Portrait mode is best used for PDF vertical right-to-left scans.
If you need to manually rotate saved images, you can use the included Presto!
PageManager software or your own graphic software.
Scanning the same original in different orientations may produce scanned images that
look slightly different in color tones and brightness. This is not a malfunction.
18
to focus on the desired setting, and then press
to exit.
screen displayed, press
Settings
to select
.
Power Saving
to scroll to
to focus on the desired setting, and then press
to exit.
or
o
left.
to enter Menu mode.
, and then press
o
right before being saved,
to select it.
to select it.
to select it.
Advertisement
Table of Contents
