MultiPASS MP730/MP700 Chapter 4: Maintenance and Service
2. HOW TO CLEAN PARTS
2.1 Main Unit Outer Covers
Wipe with a dry, soft cloth.
2.2 Pickup/Separation Roller (MP730 only)
Open the ADF cover, and wipe with a dry, soft cloth.
2.3 Document U-Turn/Feed/Eject Roller (MP730 only)
Open the ADF cover, and wipe with a dry, soft cloth.
2.4 Separation Guide (MP730 only)
Open the ADF cover, and wipe with a dry, soft cloth.
2.5 Document Guide Sheet (MP730 only)
Open the ADF ass'y, and wipe with a dry soft cloth.
2.6 Document Glass
Open the pressure plate or ADF ass'y, and wipe with a dry soft cloth.
2.7 White Sheet Area
Detach the document glass from the machine, and wipe the rear side (white sheet attached area)
of the document glass with a dry, soft sloth.
2.8 Printer Platen
Open the flatbed ass'y, and wipe with a cloth moistened with a little water.
If the parts above are very dirty, wipe with a cloth moistened with IPA
(isopropyl alcohol).
NOTE
Do not use tissue paper. Dust from the tissue paper causes static electricity.
Precautions when Using IPA
When cleaning with IPA, take care to prevent the IPA from splashing high-
temperature parts. If IPA splashes high-temperature parts, leave for at least
three minutes to allow the IPA to evaporate.
4-4