6. TEST FUNCTIONS
6.1 User Test Print Functions
User enabled Test print functions are as follow.
6.1.1 Nozzle check pattern
If you find a nozzle pattern indistinct or partially missing when you conduct this test print, do
the head cleaning. If the symptom is not solved even after the cleaning is done three times, do
the head refreshing. If the head refreshing does not solve the symptom, replace the BJ cartridge
or the ink cartridge. The method of printing a nozzle check pattern is to press the Menu key,
select MAINTENANCE using < / > keys, and press the Set key. Select NOZZLE CHECK
using < / > keys, and then press the Set key.
Figure 4-21 Nozzle Check Pattern Print
MultiPASS MP730/MP700 Chapter 4: Maintenance and Service
4-47