MultiPASS MP730/MP700 Chapter 3: Assembly and Disassembly
2.1.5 Power supply unit
(1) Disassemble the print and ASF ass'y by performing steps (1) through (23); then, take out
the print and ASF ass'y.
(2) Remove the 2 screws (m), and detach the power supply cover.
(3) Disconnect the connector JCN101 of the power supply unit.
(4) Remove the 4 screws (n), and detach the power supply unit.
m
Power supply cover
Power supply unit
n
Figure 3-22 Power supply unit
3-22