Canon MP 700 Service Manual page 63

MultiPASS MP730/MP700 Chapter 3: Assembly and Disassembly
(9) Detach the 2 separation shaft guides from the shaft.
(10) Remove the E-ring.
(11) Remove the gear.
(12) Remove the 2 bushings.
(13) Remove the separation unit.
(14) Remove the 2 screws (f), and detach the document guide lower cover.
(15) Remove the 2 lever.
(16) Remove the spring.
(17) Remove the separation guide.
Document guide
lower cover
Lever
Bushing
Gear
Figure 3-25 Separation unit, Separation guide 3
Separation unit
f
Separation
sfaft guide
Separation
guide
spring
3-25
Separation
sfaft guide
E-ring
Bushing