2. DISASSEMBLY/ASSEMBLY
As a rule, refer to the Parts Catalog for instructions on how to disassemble and assemble the
machine. The discussions that follow are limited to those components that are thought to require
replacement relatively more often than others.
2.1 Disassembly Procedure
2.1.1 SPCNT board (Replacing the ROM), NCU board
(1) Push the button, and open the flatbed ass'y.
(2) Remove the 2 screws (a), and detach the SPCNT cover. (You are now ready to replace
the ROM.)
Figure 3-5 SPCNT board, NCU board 1
MultiPASS MP730/MP700 Chapter 3: Assembly and Disassembly
a
3-9
SPCNT cover
Button