4.7 MENU SETUP ON THE OPERATION PANEL
4.7.1 Menu setup procedure
Step 1 : Verify that the printer is in Normal mode.
Step 2 : Press the [Menu] key.
Result:
•
The printer is in Menu mode.
•
The following message is shown: "Menu 1: Setup>".
Step 3 : Press the [+] or [–] key to select a setup item and press the [Enter] key to confirm your choice.
Result:
•
The settings will be confirmed, OR,
•
when a setup item has a submenu, the submenu will be displayed.
Notes
•
When a setup item has a submenu, [>] is displayed at the right end of the operation panel.
•
For details of each setup item, refer to Setup menu
•
Press the [+] or [-] key to change the settings on the LCD monitor that are blinking.
77
AP-75740 – Rev 1.2 – 6/07/2011
User's Guide ValueJet 1204
Chapter 4: Handling the printer