MUTOH ValueJet VJ-1204 User Manual page 75

User's Guide ValueJet 1204
Chapter 4: Handling the printer
Check that the confirmation pattern printing result is as follows.
o When the printing result is O:
You do not to need perform Alignment.
o When the printing result is X:
You need to perform Alignment. Proceed to step 9.
Register a set value for Bi-D Quality (two-way printing/quality priority mode).
Step 8 : Press the [+] or [–] key to select "Adj.4: Bi-D Quality".
Step 9 : Press the [Enter] key.
Step 10 : Start "Bi-D Quality" pattern printing.
75 AP-75740 – Rev 1.2 – 6/07/2011