MUTOH ValueJet VJ-1204 User Manual page 32

Notes
•
If there is a problem during the Power off sequence, the printer displays a message and may
stop operating.
In case operation stops, refer to "Troubleshooting" and deal with the problem.
•
After switching OFF the printer, wait for 10 seconds or longer to switch it ON again.
Raise the media hold lever after the powering OFF cycle. This in order not to damage the media
Step 3 :
due to the pressure of the grid rollers.
N°
1 Media hold lever
32
Name
AP-75740 – Rev 1.2 – 6/07/2011
User's Guide ValueJet 1204
Chapter 3: Installing the Unit