4.8.1.1
User media menu
Various settings on the user media can be set.
Notes
•
If non-compatible media is used, the following problems may occur:
Media detection error
o
Slant, snag and wrinkle of media
o
Media jams
o
Optimum printing quality cannot be obtained due to blots, blurs and dirt of ink.
o
End detection of roll media cannot be performed, etc.
o
•
The problems caused by the use of non-compatible will not be covered by the warranty and
repair expenses will be paid by the customer.
For details, contact your MUTOH local dealer.
Setup item
Type 1 to 30
Setting Value
Print mode
PF Adjust
Pre Heater
Fixer (platen)
Dryer
StandbyHeating
Vacuum Fan
—
Set up the print mode according to the used print
data or print speed.
Various settings on the Media feed compensation
can be set.
Set up the Pre Heater temperature.
Set up the Platen Heater temperature.
Set up the After Heater temperature.
Set up whether the heater is preheated while in
standby mode.
Set up the vacuum fan operation
•
[Cancel] key: Shift to the previous hierarchy.
80
AP-75740 – Rev 1.2 – 6/07/2011
User's Guide ValueJet 1204
Chapter 4: Handling the printer
Description