MUTOH ValueJet VJ-1204 User Manual page 76

User's Guide ValueJet 1204
Chapter 4: Handling the printer
Step 11 : Check the "Bi-D Quality" pattern printing and select the number corresponding to the lines that are
most closely aligned. "4" is selected in the following printing sample.
Step 12 : Press the [+] or [–] key to enter the number that you selected.
Step 13 : Press the [Enter] key.
Step 14 : The set value for "Bi-D Quality" is registered.
Register a set value for Bi-D Normal (two-way printing/normal mode) as in step 8.
Alignment ends.
76 AP-75740 – Rev 1.2 – 6/07/2011