MUTOH ValueJet VJ-1204 User Manual page 107

5.1.5.3 Replacement steps
Verify that the printer is switched ON.
Step 1
Pull out the waste fluid tank.
Step 2
Result: No Waste fluid tank" is displayed.
Notes
•
Put used waste fluid tank in a vinyl bag or bag used for this kind of waste. Disposal of a waste
fluid tank must be done in compliance with the regulations and instructions of the local
authorities.
Install a new waste fluid tank in the.
Step 3
Verify that the operation panel displays "Exchange Tank? No".
Step 4
Select "Exchange Tank? Yes" and press the [Enter] key.
Step 5
Notes
•
If the waste fluid tank is not replaced, press the [Enter] key with "Exchange Tank? No"
displayed.
N° Name
1 Waste fluid box
N° Name
1 Waste fluid tank
107 AP-75740 – Rev 1.2 – 6/07/2011