Host Type
If you're using a Synapse cable, your host is
autodetected, so no host bar codes need to be scanned.
If not, select an IBM 46XX, RS-232 or USB host from the
following bar code menus.
IBM 46XX Host Types (LS 6005i)
To select one of the following as a POS Interface, scan
the appropriate bar code below.
Note: To properly communicate with
468X/9X terminals, the driver
corresponding to the port being
used must be loaded and
enabled when you are
configuring your terminal system.
See your terminal's operating
manual for details.
Port 5B
Programming
5-11