Intercharacter Delay - Symbol LS 6000i Product Reference Manual

LS 6000i Series Product Reference Guide

Intercharacter Delay

Select the intercharacter delay option matching host
requirements. The intercharacter delay gives the host
system time to service its receiver and perform other
tasks between characters. The delay period can range
from no delay to 99 msec in 1-msec increments. After
scanning the bar code below, scan two bar codes
beginning on page 5-138 to set the desired time-out. If
you make an error or wish to change your selection,
scan CANCEL bar code on page 5-143.
INTERCHARACTER DELAY
5-40