Table of Contents
Advertisement
identifies the host type on power-up. It makes this
determination provided the host is powered-up before
the scanner is attached to it. You must then select the
appropriate terminal type for that host. For example, if
the scanner is connected to an IBM 4683, after you hear
the power-up beeps, select the proper port from the
choices in
IBM 46XX Host Types (LS 6005i) on page 5-
11.
Defaults
The following table lists the defaults for all parameters.
If you wish to change any option, scan the appropriate
bar code(s).
Parameter
Set Default Parameter
Host Type
IBM 46XX (LS 6005i)
RS-232C (LS 6004i)
Baud Rate
Parity
Check Receive Errors
5-2
LS 6000i Series Product Reference Guide
Table 5-1. Default Table
Default
All Defaults
See
page 5-11
--
--
9600
Even
Check
Page
Number
5-10
5-11
5-11
5-13
5-19
5-23
5-26
Advertisement
Table of Contents
