Trigger Mode
Scan a bar code below to select one of the following
trigger modes:
•
In Triggered Omnidirectional Mode, an
omnidirectional scan pattern activates upon
trigger pull.
•
In Triggered Single Scan Line Mode, a single
scan line appears upon trigger pull.
•
If Combination Mode is selected, the
omnidirectional scan pattern is always on and
ready to decode. When the trigger is pulled, the
scanner emits a single scan line to decode, then
reverts back to omnidirectional constant-on.
This mode is only for hand-held use.
(CONSTANT-ON OMNIDIRECTIONAL/TRIGGERED
5-54
LS 6000i Series Product Reference Guide
COMBINATION MODE
SINGLE SCAN LINE)
(Default)