Optional Brick Liner Installation Instructions - Empire Comfort Systems DVCD32FP30P-1 Installation Instructions And Owner's Manual

1. Using gloves, unpack liner components and check for
damaged or missing components.
2. Lower bottom louver and remove upper louver on
4. Remove rear logs from burner assembly.
panel (left & right), place brick panel (sides) against side
be installed with full brick pattern at the bottom. Move
side panels rearward until the back edge meets the rear
brick panel. Slide side brick panels down so they rest on
brick panel.
Page 56
7. Align grout lines on top brick panel with the grout lines
on the side brick panels. Place the top brick panel into
brick panel holder. With needle-nose pliers, carefully
bend hold-down tabs on brick panel holder over the
edges of the top brick panel. The hold-down tabs will
securely hold the top brick panel in place.
8. Replace rear logs onto burner assembly. (Refer to log
placement, pages 36 and 37.
10. Raise bottom louver and replace top louver onto
11. Installation of optional brick liner is complete.
29354-1-1012