Setting Up Your Digital Camera; Docking And Charging The Camera - Kodak EasyShare G600 User Manual

2

Setting up your digital camera

Docking and charging the camera

Docking your digital camera lets you make prints directly from the camera, transfer
pictures from the camera to the computer, and charge the camera battery.
IMPORTANT: To charge your camera battery, your printer dock must be powered by the
AC adapter (not the printer battery).
This printer dock is ImageLink print-system compatible. You can dock not only Kodak
EasyShare digital cameras, but other brands of ImageLink system-compatible digital
devices.
NOTE: Not all cameras are compatible for charging on the G600 printer dock. See your camera user's guide
for dock compatibility.
Docking the camera
NOTE: If the printer dock is turned off when you dock the camera, the printer dock turns on and initialises.
www.kodak.com/go/support
1 Attach a custom camera insert to the printer dock
(see page 2).
2 Load a Kodak Ni-MH rechargeable digital camera
battery KAA2HR, or a Kodak Li-Ion rechargeable
digital camera battery into the camera for charging.
See your camera user's guide.
NOTE: Your printer dock charges only Kodak Ni-MH KAA2HR and
Li-Ion rechargeable batteries.
3 Place the camera on the printer dock. Push camera
down to seat the connector.
The battery status light on the printer dock lights up
and an initializing message appears on the camera.
7