Table of Contents
Advertisement
Camera battery button/light
Light status
Light is off
Light glows green
Light blinks green
Light glows amber
Light blinks amber
www.kodak.com/go/support
Cause
Camera not properly seated on
connector.
Unrecognized battery type
installed, or camera does not
support charging.
AC power cord not connected.
Camera just placed on printer
dock.
Battery fully charged.
Battery charging.
Battery not properly installed.
Battery or connector pin damaged. Check for damage.
Camera and battery exposed to
extreme temperatures.
Battery exhausted.
The Ni-MH battery pack refresh
cycle in progress: discharging
(light turns off as discharging
progresses).
Troubleshooting
Action/solution
Reseat the camera on the printer
dock
(page
7).
Install a Kodak Ni-MH
rechargeable digital camera
battery or Kodak Li-Ion
rechargeable digital camera
battery. See your camera user's
guide for battery compatibility and
other charging options.
Connect the AC power cord
(page
3).
None; dock is checking the charge
status of the battery.
None required.
Leave the camera on the dock to
continue charging or to maintain
charge.
Re-install the battery.
Slowly return the camera and
battery to room temperature.
Refresh the battery
Leave the camera on the dock to
continue refresh cycle
(page
9).
(page
9).
51
Hide quick links:
Advertisement
Table of Contents
