Kodak EasyShare G600 User Manual page 15

Refreshing the Kodak Ni-MH rechargeable camera battery
IMPORTANT: The battery refresh feature is intended for use with the Kodak Ni-MH
rechargeable digital camera battery KAA2HR only. Li-Ion batteries do not
require refreshing.
NOTE: If you are getting fewer than 20 pictures per charge, you may need to refresh the battery. The
refresh cycle completely discharges the battery, then fully charges it. See Extending battery life,
page 60.
1 Make sure the Ni-MH rechargeable battery is in the camera.
2 Place your EasyShare camera on the printer dock
3 Press and hold the Print Layout button,
on the printer dock at the same time until the Battery status light blinks
,
amber (approximately 5 seconds), then release the buttons.
To purchase a Kodak Ni-MH rechargeable digital camera battery for your digital
camera, visit www.kodak.com/go/accessories. See your camera user's guide for
battery compatibility.
www.kodak.com/go/support
Battery status light
8 hours for
full refresh
Setting up your digital camera
Battery light glows
green when charging
is complete .
(page 7).
, and the Red-eye Reduction button,
9