Table of Contents
Advertisement
Transfer button/light
Light status
Light blinks green
Light is off
Red-eye-reduction button/light
Light status
Light glows green
Light is off
www.kodak.com/go/support
Cause
Pictures transferred to the
computer.
No pictures in camera or on
memory card.
Camera not docked.
Printer dock not connected to
computer.
Camera not properly seated on
connector.
Computer off.
Cause
Red-eye reduction applied to
pictures for current print job.
Red-eye reduction not selected.
Troubleshooting
Action/solution
None required.
After transferring pictures, the transfer
light continues to blink green until
either the camera is removed, the
Transfer button is pressed again, or the
connection is no longer available.
None required.
To enable Transfer:
1
Connect printer dock to computer
(page
22).
2
Take pictures.
3
Dock the camera.
Reseat the camera on the printer dock
(page
7).
Turn on the computer.
Action/solution
None required.
To turn red-eye reduction on
or off, press the
Red-Eye-Reduction button.
53
Hide quick links:
Advertisement
Table of Contents
