FUNCTION
Standby
Settings
Network
settings
Reset All
Settings
Operation
DESCRIPTION
Network
Selecting On enables the function. The projector is able to provide
the network function when it is in standby mode.
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
to make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
to choose the source that you wish to use. See
23
for how to make the connection.
Enabling this function slightly increases the standby power consumption.
Wired LAN
See
"Controlling the projector through a LAN environment" on page
49
for details.
Wireless LAN
See
"Controlling the projector through a LAN environment" on page
49
for details.
Remote Desktop
See
"Displaying image through Q Presenter" on page 58
Projection Login Code
See
"Using the Projection Login Code" on page 61
Broadcasting
See
"Using the broadcassting function" on page 62
AMX Device Discovery
When AMX Device Discovery is On, the projector can be
detected by AMX controller.
MAC Address
Displays the mac address for this projector.
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
Projector Installation, Language, High Altitude Mode, Security
Settings, Baud Rate.
"Connection" on page 23
"Connection" on page
for details.
for details.
for how
/
for details.
77