Introduction; Projector Features - BenQ SH915 User Manual

Introduction

Projector features

The projector offers the following features
• SmartEco™ starts your dynamic power saving
The SmartEco™ technology offers a new way of operating the projector lamp system
and saves lamp power up to 70% depending on the content brightness level.
• Longer lamp life with SmartEco™ technology
The SmartEco™ technology lowers the power consumption and increases the lamp life
when SmartEco mode is selected.
• ECO BLANK saves 70% of lamp power (available in SH915)
By pressing the ECO BLANK button to hide the image and immediately lower 70% of
the lamp power at the same time.
• ECO BLANK saves 50% of lamp power (available in SW916)
By pressing the ECO BLANK button to hide the image and immediately lower 50% of
the lamp power at the same time.
• USB MINI-B jack to display computer signal through a USB cable.
• USB TYPE A jack to present images stored on a USB flash driver.
• Less than 0.5W in standby condition
Less than 0.5W power consumption under standby mode.
• Filter Free
Filter free design to lower maintenance and operating costs.
• Network Control
Integrated RJ45 connector for wired network control allowing management of
projector status from a computer using a web browser.
• Crestron RoomView
The projector supports Crestron eControl and RoomView, PJ Link and AMX allowing
you to control and manage equipment from a remote computer via LAN connection.
• One-key auto-adjustment
Pressing AUTO on the keypad or remote control to show the best picture quality
immediately.
• Built-in 5W speaker(s)
Built-in 5W speaker(s) providing mixed mono audio when an audio input is connected.
• Quick Cooling, Auto Power Off, Signal Power On, Direct Power On
Quick Cooling function speeds up the cooling process when turning off the
projector. Auto Power Off function allows the projector to turn off automatically if
no input signal is detected after a set period of time. Signal Power On function turns
on your projector automatically once detecting the signal input and Direct Power On
boots up the projector automatically when the power is connected.
• Instant Restart
Selectable Instant Restart function enables you to restart the projector immediately
within 90 seconds after turning it off.
• 3D Function supported
Various 3D formats make the 3D function more flexible. By presenting the depth of the
images, you can wear BenQ 3D glasses to enjoy the 3D movies, videos and sporting
events in a more realistic way.
Introduction
®
, PJ Link and AMX supported
7