Table of Contents
Advertisement
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a
lock, such as a Kensington lock, to secure the projector. You can locate a Kensington lock
slot on the left side of the projector. See
details.
A Kensington security cable lock is usually a combination of key(s) and a lock. Refer to the
lock's documentation for finding out how to use it.
Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an
option for setting up password security. The password can be set through the On-Screen
Display (OSD) menu.
WARNING: You will be inconvenienced if you activate the power-on lock functionality and subsequently forget
the password. Print out this manual (if necessary) and write the password you used in this manual, and keep
the manual in a safe place for later recall.
Setting a password
Once a password has been set, the projector cannot be used unless the correct password is entered every
time the projector is started.
1.
Open the OSD menu and go to the System Setup: Advanced > Security
Settings menu. Press MODE/ENTER. The Security Settings page displays.
2.
Highlight Change Security Settings and press MODE/ENTER.
3.
As pictured to the right, the four arrow
keys (▲, ▼, ◄, ►) respectively represent
4 digits (1, 2, 3, 4). According to the
password you desire to set, press the
arrow keys to enter six digits for the
password.
4.
Confirm the new password by re-entering
the new password.
Once the password is set, the OSD menu
returns to the Security Settings page.
5.
To activate the Power on Lock function, press ▲/▼ to highlight Power on Lock
and press ◄/► to select On.
6.
To activate the Web Control Lock function, press ▲/▼ to highlight Web
Control Lock and press ◄/► to select On.
When the Web Control Lock is activated, you have to enter the correct password
to change projector settings via the Projector Network Display System
The digits being input will display as asterisks on-screen. Write your selected password down here in this
manual in advance or right after the password is entered so that it is available to you should you ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
7.
To leave the OSD menu, press MENU/EXIT.
34
Operation
"Kensington anti-theft lock slot" on page 10
INPUT PASSWORD
for
MENU/BACK
Back
Hide quick links:
Advertisement
Table of Contents
