Remote Paging Operations - BenQ SH915 User Manual

3. Press ▼ to highlight Timer Display and choose if you want the timer to show up
on the screen by pressing ◄/►.
Selection
Always
3 min/2 min/1 min
Never
4. Press ▼ to highlight Timer Position and set the timer position by pressing ◄/►.
5. Press ▼ to highlight Timer Counting Direction and select your desired counting
direction by pressing ◄/►.
Selection
Count Up
Count Down
6. Press ▼ to highlight Sound Reminder and decide if you want to activate sound
reminder by pressing ◄/►. If you select On, a double beep sound will be heard at
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7. To activate the presentation timer, press ▼ and press ◄/► to highlight On and
press MODE/ENTER.
8. A confirmation message appears. Highlight Yes and press MODE/ENTER on the
projector or remote control to confirm. You will see the message "Timer is On"
appearing on the screen. The timer starts counting when the timer is on.
To cancel the timer, perform the following steps:
1. Go to the System Setup: Basic > Presentation Timer menu and highlight Off.
Press MODE/ENTER. A confirmation message appears.
2. Highlight Yes and press MODE/ENTER to confirm. You will see the message
"Timer is Off" appearing on the screen.

Remote paging operations

Connect the projector to your PC or notebook with a USB cable prior to using the paging
function. See
You can operate your display software program (on a connected PC) which responds to
page up/down commands (like Microsoft PowerPoint) by pressing PAGE +/PAGE - on the
remote control.
If remote paging function doesn't work, check if the USB connection is correctly made and
the mouse driver on your computer is updated to the latest version.
• The remote paging function cannot work with Microsoft
XP or higher operating systems are recommended.
• The function is only available for SH915.
44 Operation
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 3/2/1 minute(s).
Hides the timer throughout the presentation time.
Description
Increases from 0 to the preset time.
Decreases from the preset time to 0.
"Connection" on page 23 for details.
®
Windows
®
98 operating system. Windows
®