Table of Contents
Advertisement
Function
Closed
Caption
Standby
Settings
44
Operation
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
•
Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).
Network
•
Enable Network Standby Mode
Selecting On enables the function. The projector is able to provide
the network function in standby mode. Selecting Off disables the
function. The projector does not provide the network function in
standby mode.
•
Auto Disable Network Standby Mode
Allows the projector to disable the network function after a set
period of time after it enters standby mode. For instance, if 20 min
is selected, the projector is able to provide the network function
for 20 minutes after it enters standby mode. When 20 minutes is
up and the projector does not receive any network package, the
projector enters normal standby mode.
This function is only available when Enable Network Standby Mode
is On.
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
to make the connection.
Audio Pass Through
Press
/
to choose the source that you wish to use in operation
mode. See
"Connection" on page 15
When the corresponding jacks are correctly connected to the device,
the projector can output an audio signal to the external speaker when
it is in standby mode. The built-in speaker(s) will be muted in standby
mode.
Enabling this function slightly increases the standby power consumption.
Description
"Connection" on page 15
for how to make the connection.
for how
Advertisement
Table of Contents
