Monitor Out - BenQ MS512H User Manual

Function
Closed
Caption
Standby
Settings
Reset All
Settings
44 Operation
Downloaded From projector-manual.com BenQ Manuals
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).

Monitor Out

Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
to make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
for how to make the connection.
Enabling this function slightly increases the standby power consumption.
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, User 1, User 2,
Reference Mode, Reset Picture Settings, Projector Installation,
Language, High Altitude Mode, Security Settings, Baud Rate, Reset
All Settings and Current System Status.
Description
"Connection" on page 16
"Connection" on page 16
for how
/ to