Direct Power On; Auto Power Off; Sleep Timer - BenQ SH915 User Manual

FUNCTION
Operation
Setting
Remote
Receiver
Panel Key
Lock
Background
Color
Splash Screen
Operation
DESCRIPTION

Direct Power On

Powers projector on automatically when the power cable is
connected.
Signal Power On
Sets whether to turn the projector directly on without pressing
POWER or ON when the projector is in standby mode and the
signal is feed through the VGA cable.

Auto Power Off

Allows the projector to turn off automatically if no input signal is
detected after a set period of time.
See "Setting Auto Power Off" on page 80
Quick Cooling
Enables or disables the Quick Cooling function.
Selecting On enables the function and the projector cooling time will
be shortened from a normal 90 second duration to approximately 2
seconds.
If you attempt to restart the projector right after the quick cooling
process, it may not be turned on successfully and will rerun its cooling fans.
Instant Restart
Selecting On enables you to restart the projector immediately within
90 seconds after turning it off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen.
See "Hiding the image" on page 45

Sleep Timer

Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
Sets the preferred remote receiver (Front and Rear) allowing the
projector to accept signals from the remote control.
Disables or enables all panel key functions except
the projector and keys on the remote control. See
keys" on page 45 for details.
Selects background appearance when there is no signal.
Allows you to select which logo screen will appear during projector
start-up
for details.
for details.
POWER on
"Locking control
75