Monitor Out - BenQ MX704 User Manual

Function
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
•
Closed
Caption
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).

Monitor Out

Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
to make the connection.
Audio Pass Through
Standby
Press
Settings
mode. See
When the corresponding jacks are correctly connected to the device,
the projector can output an audio signal to the external speaker when
it is in standby mode. The built-in speaker(s) will be muted in standby
mode.
Returns all settings to the factory preset values.
Reset All
Settings
Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
/ to choose the source that you wish to use in operation
"Connection" on page 18
Enabling this function slightly increases the standby power consumption.
The following settings will still remain: 2D Keystone, User 1, User 2,
Reference Mode, 3D Color Management, Reset Picture Settings,
Projector Installation, Language, High Altitude Mode, Security
Settings, Baud Rate.
Description
"Connection" on page 18
for how to make the connection.
for how
Operation 49