Configuring Smart Roaming; Step 1. Configuring Ip Address; Step1. Configuring Ip Address - Omron WE70-AP Operation Manual

Chapter 4. Advanced Setup

4-10. Configuring Smart Roaming

Roaming is a function of communication for a moving client (slave) switching paths with more than 1 wired
access point. If there are 2 access points, connect PC, hub, wireless units, and PLC as shown below.
BSSID: "00-00-0A-68-00-09"
SSID: "omronwe70wlan" (Factory Shipment Status)
192.168.0.1 (Factory Shipment Status)
4
Before Change
802.11a : 36CH
(Factory
Shipment
After Change
802.11a : 40CH

Step 1. Configuring IP Address

Change access point AP-2 IP address.
Leave AP-1 [192.168.0.1] and CL-1 [192.168.0.254] as they are.
4-24
PC
HUB
Ethernet
WE70-AP
AP-1 AP-1 AP-1
Status)
CL-1 CL-1 CL-1
<To Configure>
(1) Open a setup screen of AP-2 (see Chapter 2-3. Connection Check,
Opening Setup Screen (P.2-13)) and click Network settings menu.
(2) Change the IP address to "192.168.0.2".
(3) Click <Apply and restart>.
BSSID: "00-00-0A-68-20-01"
SSID: "omronwe70wlan" (Factory Shipment Status)
"802.11a:36CH" (Factory Shipment Setting)
WE70-AP
WE70-CL
Shift
SSID: "omronwe70wlan"
(Factory Shipment Status)
192.168.0.254(Factory
Shipment Status)
PLC
Before Change
192.168.0.1
AP-2 AP-2 AP-2
(Factory
Shipment
Status)
After Change
192.168.0.2
CL-1 CL-1 CL-1