Writing Saved Setup Data - Omron WE70-AP Operation Manual

Chapter 6. Replacement Procedure

■ Writing Saved Setup Data

This section describes how to write a setup file saved by "Saving Setup Data" to a wireless unit.
Writing a setup file can help reducing setup work for wireless unit replacement.
Key generator, WEP key, and SSID data cannot be written for client (slave) replacement only.Writing to a
client (slave) after initialization instead of replacement, however, allows all setup data to be written.
* Before starting the following steps, make sure that other terminals on the wireless unit network that are used to write data are not
communicating.
For WE70-AP
6
1.
For WE70-CL
1.
6-4
<How to Write>
(1) Open a setup screen of the wireless unit (see Chapter 2-3. Connection
Check, Opening Setup Screen (P.2-13)) and click Maintenance menu >
Setting file.
• A Save Setup screen is displayed.
(2) To specify a link to a saved setup file, click <Browse> in Writing of
settings.
(3) Specifying a saved setup file and clicking <Open> in the screen displays
its file name in the File Name text box.
(4) Click <Write>.
• Setting file data is now written to the wireless unit.
(5) After data is written, close the setup screen and open a new Setup
screen.
* Current Setup screen cannot reflect written setup file data.
Click
Click
2. Click
4. Check
2. Click
4. Check
3. Click
Click
5.
3. Click
5. Click