Wireless Settings - Omron WE70-AP Operation Manual

Chapter 5. Setup Menu

■ Wireless settings

<Basic settings> Screen
● Communications settings
This is a setup item for a wireless LAN card in a wireless unit.
<Apply> Button..................... This button fixes a changed setup item in the "Wireless settings" screen.
<Cancel> Button................... This button resets changed setup items in the "Wireless settings" screen
5
<Apply and restart> Button
..................................... Clicking this button restarts an access point and enables all setup items
(1) SSID.................................. This is used for grouping of wireless networks.
5-4
(1)
(2)
(3)
(4)
The changed item cannot be enabled unless <Apply and restart> is
clicked.
to original settings before the change.
Note that the original setting cannot be recovered after <Apply> or <Apply
and restart> button is clicked.
changed in the "Wireless settings" screen.
If more than one wireless routers or access points exist in one wireless
communication zone, cross talk with other wireless network group can be
prevented by identification using different SSID (wireless network name)
for each wireless network group.
Communication is not available with a wireless LAN terminal with a differ-
ent SSID.
You can enter the desired alphanumeric characters in SSID (within 31
characters) with the attention for capitalization.
(Factory Shipment Status:omronwe70wlan)
* SSID and ESSID have the same meaning.
Some wireless LAN devices other than a wireless unit may call this ESS ID.
AP