Setup - Omron WE70-AP Operation Manual

Chapter 5. Setup Menu
<System administration> Screen
● Time setting
You can configure the internal clock of an access point. An access point records history in SYSLOG.
To record its date and time, configure the clock.
<Apply> Button..................... Clicking this button enables all setup items changed in the "Time setting".
<Cancel> Button................... This button resets changed setup items in the "Time setting" screen to
(1) Unit Time.......................... Displays time set in an access point.
(2) Setting time ..................... Indicates time when access to a setup screen of the access point is
(3) <Time setting> Button .... This button is used to set time displayed in [Time to Set](2) to the access
5
● SYSLOG setting
This item specifies output of log information to a specified host address.
(1) Use DEBUG ..................... You can specify whether debug information output should be made to
(2) Use INFO .......................... You can specify whether INFO type message output should be made to
(3) Use NOTICE..................... You can specify whether NOTICE type message output should be made
(4) Host Address................... To use the SYSLOG function, enter a host address to receive SYSLOG.
5-18
(1)
(2)
original settings before the change.
Note that the original setting cannot be recovered after <Apply> button is
clicked.
made.
* Clicking <Refresh> of a WWW browser acquires and displays time of the terminal.
point.
To set correct time, make access to access point setup screen again, or
click WWW browser <Refresh> and <Set Time>.
(1)
(2)
(3)
(4)
SYSLOG or not. (Factory Shipment Status: Invalid)
SYSLOG or not. (Factory Shipment Status: Valid)
to SYSLOG or not. (Factory Shipment Status: Valid)
The host must support SYSLOG server function.
AP
(3)