To Register Bssid - Omron WE70-AP Operation Manual

Chapter 4. Advanced Setup

■ To Register BSSID

A BSSID can be registered in two ways; automatic detection and manual input.
●Automatic Detection
Configuring the same channel and SSID for AP-1 and AP-2 allows automatic detection of BSSID of
partner, making registration easier. Register AP-1 BSSID to AP-2 as well.
BSSID: "00-00-0A-68-00-09"
SSID: "omronwe70wlan" (Factory shipment status)
192.168.0.1
4
● Manual Input
Verify BSSIDs for AP-to-AP bridging from "Information" menu, "Wireless settings" setup screen, and
configure AP-2 BSSID by manual input. If SSIDs of access points AP-1 and AP-2 are unmatched, enter
it manually for registration.
4-4
AP-to-AP Bridging
WE70-AP
AP-1 AP-1
"Wireless Settings" Menu > "Communications between Aps" Setup Screen
If SSIDs and channels are the same, the screen displays a BSSID, which
can be registered by clicking "Add".
AP-1
AP-1
BSSID: "00-00-0A-68-20-01"
SSID: "omronwe70wlan" (Factory shipment status)
AP-2 AP-2
"802.11a:36CH"
Added
192.168.0.2
WE70-AP
Detecting a partner
BSSID.
Added
Enter manually.