Step 3. Checking Setup Screen Access - Omron WE70-AP Operation Manual

Chapter 3 Basic Setup

Step 3. Checking Setup Screen Access

This section describes procedures for setup screen access of a client (slave) through a WWW browser.
3
Specifying the configured IP address
(factory shipment setup:
192.168.0.254) in this field allows
access.
Specifying the configured IP address
(factory shipment setup: 192.168.0.1)
in this field allows access.
3-4
<Initiating Setup Screen>
(1) Start a WWW browser.
* In this document Internet Explorer 6.0 is used.
(2) Enter the IP address specified for the client (slave) in the address bar of
the WWW browser.
Enter "http://192.168.0.254/" (factory shipment status) and press [Enter] key.
• A screen in Settings menu is first displayed.
* A screen shown below indicates a factory shipment status or all-initialized status of a wireless unit.
For WE70-AP
(1) Enter the IP address specified for the access point in the address bar of
the WWW browser.
Enter "http://192.168.0.1/" (factory shipment status) and press [Enter]
key.Enter [admin] to user-name. and press [Enter] key ignoring a
password request.
* A screen shown below indicates a factory shipment status or all-initialized status of a wireless unit.
1. Enter http://192.168.0.254/
2. Press [Enter] key.
1. Enter http://192.168.0.1/
2. Press [Enter] key.